====== Ember Cortex-M3 ======
//Generic module for the wireless standard 802.15.4 to use with zigbee/lo6pan/MiWi/etc, build on an Ember Cortex-M3. //

===== Changelog =====
**Status: ** //Prototyping..//

^ Date ^ Comment ^
| 2010-12-14 | First pcb batch received. |
| 2010-06-01 | Project created. |
===== About =====
This module is an improvement of the [[hardware:generic802154]] using a Arm Cortex-M3 instead of PIC. Developed together with Erik Botö. \\
Currently we have the following PCBs: \\
  * A generic development card with a Cortex-M3, 3x10 GPIOs, 5V and battery supply circuits, JTAG and integrated Chip antenna and balun.
  * An USB expansion card to the above.
  * An Ethernet expansion to the above.
  * A Dimmer expansion for dimming 230V lighting.
  * A card same as the development card, but with an integrated dimmer and without battery supply circuits.


===== Hardware =====

{{:hardware:emberpcbs.jpg?320| First PCB batch}} \\
First PCB batch


===== Schematics =====
===== Firmware =====
===== Downloads =====
===== License =====
All information found on this page are licensed. See the [[documents:license]] page for more information.